When the hydraulic manual pump is discharging oil, pay attention to the aspect ratio of the liquid level to the cast-in-place plate of the car's fuel tank. It is not necessary to exceed 40 cm. The purpose of doing so is to ensure the internal rolling bearing of the hydraulic pump and the water cooling. Assume that the cavity capacity of the hydraulic pump is too large in the work of the hydraulic pump, it is necessary to open another car fuel tank, which is done in order to discharge the oil level. The oil strainer of the hydraulic manual pump should be cleaned immediately or often to prevent blockage. When customers use car fuel tanks, the compressor lubricating oil temperature does not need to exceed 65 degrees Celsius, and it is necessary to take useful water cooling at that time.
The key characteristics of hydraulic manual pumps: compact design of hydraulic manual pumps, practical operation by hand, corrosion resistance, careful implementation, stable operation of hydraulic manual pumps; the service life of high-performance hydraulic manual pumps is a problem that everyone pays attention to, Buy the same manual pump of this hydraulic machine from the same manufacturer. Some customers are not prone to long-term abnormal use for a long time. Rich customers will soon need to replace parts or repair or even not use it. . This situation of hydraulic manual pump is not strange. It is related to the operation process and habit of everyone. Therefore, it is necessary to cultivate appropriate practical operation habits. It is assumed that the hydraulic pump manual pump should be stored in dust-free for a long time. Office.
Hydraulic pump manual pump single electric actuator is required for the actual operation of thrust, the technical professional handling of hydraulic rod pump processing, the responsible person's learning and training and the buyer's expense. Technical characteristics of manual pumps for hydraulic presses, pump statistics on reported logos and prints, high working pressure in a special method. The car tank of the hydraulic manual pump must have enough oil to fill the hydraulic oil pump connected to the power circuit. 1 individual who is strictly prohibited from using the hydraulic drive system in the manual pump box of a hydraulic press! For example, the hydraulic manual pump itself has been working, it is necessary to have a larger indoor space to show the full cylinder stroke organization. In this case, when the stroke of the piston rod is disordered, the hydraulic pump manually pumps the oil in the car's fuel tank, and the total amount of crude oil in the hydraulic pump's manual pump power circuit will be significantly reduced, which will cause it to explode.
Hebei Yuanxing General Equipment Manufacturing Co., Ltd. was founded in 2011 and formally established in July 2016. The company's main products are: torque multipliers, steel hydraulic shears, steel strand hydraulic shears, chain hydraulic shears, cable hydraulic shears; nut cutters, anchor cutters; manual oil pumps, electric oil pumps, pneumatic oil pumps; pull Puller, dynamometer, etc. Mainly sold to Hebei, Baoding and other regions, dedicated to providing customers with quality products and services, we sincerely hope to cooperate with various enterprises and units to create brilliant.
Previous post: Introduction of knowledge about chain hydraulic shears
Related News / RELATED NEWS